This paper proposes using an adaptive array in a base station for signal reception and transmission in order to increase the spectral efficiency without decreasing the cell radius. The adaptive array controls the directivity pattern of the base station to reduce co-channel interference during reception; the same array pattern is applied during transmission to prevent unnecessary illumination. Computer simulation results show that the cluster size can be reduced to one with time division duplexing (TDD), indicating that we can reuse the same frequency group at all cells. Thus, the improvement in spectral efficiency is as much as 16 fold that of an omni-antenna. Moreover, load sharing, which is expected to improve the channel utilization for unbalanced load situations, is available by cell overlapping. Frequency division duplexing (FDD) requires a weight adjust function to be applied for transmission since the difference in frequency between signal reception and transmission causes null positioning error. However, simple LMS-adjusting can provide a cluster size of one as well as cell overlapping when the frequency deference is 5%.

Space-Time Turbo code is an effective method for the enhancement of link capacity and maximizing the link-budget by balancing the coding gain obtained via Turbo codes and the diversity gain obtained through multiple antenna transmission. A study on an antenna selection scheme for Space-Time Turbo code for OFDM systems is presented in this paper. In the proposed method, the systematic bits and the punctured parity bits are sent from the selected antenna for each sub-carrier, while data transmission is suspended from the antenna experiencing poor channel conditions at the receiver. Simulation results show that the proposed method yields a 2.2 dB gain in the required TxEb/N0 relative to the conventional method, and makes the channel estimation accuracy more robust. Moreover, the proposed method reduces transmission power by about 4 dB compared to the conventional method.

In high-speed TDMA mobile communications, frequency-selective fading is a serious problem because a delay time difference between multipath signals is large in comparison with symbol duration. We have proposed a spatial-domain RAKE receiver using a multibeam adaptive antenna to reduce frequency-selective fading and to realize path-diversity. The multibeam adaptive antenna resolves multipath signals in the spatial domain, and combines array outputs. In this paper, we propose the application of MUSIC algorithm to estimation of the time delays of multipath signals to make the incident signals coincide with a common reference signal. Because the MUSIC algorithm can estimate the time delays accurately, the BER performance of the proposed scheme is improved. Furthermore, we propose weighting factors which easily realize the maximal-ratio combining.

Detecting signals in a very large multiple-input multiple-output (MIMO) system requires high complexy of implementation. Thus, belief propagation based detection has been studied recently because of its low complexity. When the transmitted signal sequence is encoded using a channel code decodable by a factor-graph-based algorithm, MIMO signal detection and channel decoding can be combined in a single factor graph. In this paper, a low density parity check (LDPC) coded MIMO system is considered, and two types of factor graphs: bipartite and tripartite graphs are compared. The former updates the log-likelihood-ratio (LLR) values at MIMO detection and parity checking simultaneously. On the other hand, the latter performs the updates alternatively. Simulation results show that the tripartite graph achieves faster convergence and slightly better bit error rate performance. In addition, it is confirmed that the LLR damping in LDPC decoding is important for a stable convergence.

Many carriers are introducing multi-media services to satisfy customer demands for these services. In order to provide such services, carrier must increase their system capacity. It is well known that space division multiple access (SDMA) improves system capacity and is compatible with existing access systems. In order to evaluate the performance of SDMA, we developed an SDMA test bed. The test bed maintains the personal handy phone systems (PHS). The PHS adopts time division multiple access (TDMA). Aiming to compare the performance of SDMA and TDMA using the same analog hardware, the SDMA test bed employs a software-defined radio (SDR) technique. This paper shows the outline and performance of the test bed. The results of laboratory tests indicate that the bit error rate (BER) of the test bed operated in the SDMA mode at under 10-3 when the carrier-tointerference ratio (CIR) was larger than approximately -22 dB. Antenna patterns measured in an anechoic chamber show that the SDMA test bed produces correct antenna patterns when there are three desired signals and one interference signal. The results of the four field tests confirm that the test bed operated while two-multiplex SDMA mode doubled of the traffic and decreased the interference level as compared with the TDMA mode. Furthermore, the test bed operated while threemultiplex SDMA mode improves the traffic about 2.4 to 2.7 times. The SDMA test bed decreased the impact of the adjusted TDMA base station (BS). Therefore, we confirmed that the SDMA improves system capacity without any degradation.

Although multi-user multiple-input multiple-output (MI-MO) systems provide high data rate transmission, they may suffer from interference. Block diagonalization and eigenbeam-space division multiplexing (E-SDM) can suppress interference. The transmitter needs to determine beamforming weights from channel state information (CSI) to use these techniques. However, MIMO channels change in time-varying environments during the time intervals between when transmission parameters are determined and actual MIMO transmission occurs. The outdated CSI causes interference and seriously degrades the quality of transmission. Channel prediction schemes have been developed to mitigate the effects of outdated CSI. We evaluated the accuracy of prediction of autoregressive (AR)-model-based prediction and Lagrange extrapolation in the presence of channel estimation error. We found that Lagrange extrapolation was easy to implement and that it provided performance comparable to that obtained with the AR-model-based technique.

Massive MIMO is known as a promising technology for multiuser multiplexing in the fifth generation mobile communication system to accommodate the rapidly-increasing traffic. It has a large number of antenna elements and thus provides very sharp beams. As seen in hybrid beamforming, there have already been many papers on the concatenation of two precoders (beamformers). The inner precoder, i.e., a multi-beam former, performs a linear transformation between the element space and the beam space. The outer precoder forms nulls in the limited beam space spanned by selected beams to suppress the inter-user interference. In this two-step precoder, the beam shape is expected to determine the system performance. In this paper, we evaluate the achievable throughput performance for different beam-shaping schemes: a discrete Fourier transform (DFT) beam, Chebyshev weighted beams, and Taylor weighted beam. Simulations show that the DFT beam provides the best performance except the case of imperfect precoding and cell edge SNR of 30dB.

The number of studies on adaptive antennas has greately increased in resent years in Japan. Most of these studies have sought to enhance the capacity and suppress multipath signals in wireless mobile communications. Adaptive antennas are expected to play an important role in future mobile radio systems. In this paper, we review the history and trends of adaptive antenna studies in Japan. We describe typical adaptive processing algorithms and contributions by Japanese researchers. We then introduce some applications of adaptive antennas for mobile communications. Furthermore, we discuss multi-dimensional signal processing, which is an extended version of the adaptive antenna.

It is difficult for an adaptive array to reduce interference signals efficiently from received signals when the interference signals and desired signal are closely located. This is a problem for a spatial division multiple access (SDMA) system using the multibeam adaptive array as a multiuser detector. In this paper, we propose a space domain multistage interference canceller (SD-MIC) for the SDMA system. Its performance is evaluated by computer simulations, assuming Japanese personal handy phone system (PHS) uplink environments. The results show remarkable improvement in high spatial correlation situations.

Sparse modeling is one of the most active research areas in engineering and science. The technique provides solutions from far fewer samples exploiting sparsity, that is, the majority of the data are zero. This paper reviews sparse modeling in radio techniques. The first half of this paper introduces direction-of-arrival (DOA) estimation from signals received by multiple antennas. The estimation is carried out using compressed sensing, an effective tool for the sparse modeling, which produces solutions to an underdetermined linear system with a sparse regularization term. The DOA estimation performance is compared among three compressed sensing algorithms. The second half reviews channel state information (CSI) acquisitions in multiple-input multiple-output (MIMO) systems. In time-varying environments, CSI estimated with pilot symbols may be outdated at the actual transmission time. We describe CSI prediction based on sparse DOA estimation, and show excellent precoding performance when using the CSI prediction. The other topic in the second half is sparse Bayesian learning (SBL)-based channel estimation. A base station (BS) has many antennas in a massive MIMO system. A major obstacle for using the massive MIMO system in frequency-division duplex mode is an overhead for downlink CSI acquisition because we need to send many pilot symbols from the BS and to get the feedback from user equipment. An SBL-based channel estimation method can mitigate this issue. In this paper, we describe the outline of the method, and show that the technique can reduce the downlink pilot symbols.

Frequency-domain equalization (FDE) has been studied for suppressing inter-symbol interference (ISI) due to frequency selective fading in single carrier systems. When a high-mobility terminal is assumed in the system, channel transition within an FDE block cannot be ignored. The ISI reduction performance of FDE degrades since the cyclicity of the channel matrix is lost. To solve this problem, a method of dividing the received data block into multiple subblocks has been proposed, where pseudo cyclic prefix (CP) processing is introduced to realize periodicity in each subblock. In this method, the performance is degraded by the inherently-inaccurate pseudo CP. In this paper, we study the application of frequency-domain turbo equalization (FDTE) to subblock processing for improving the accuracy of pseudo CP. The simulation results show that FDTE with subblock processing yields remarkable performance improvements.

Cochannel interference and multipath propagation reduce the performance of mobile communication systems. Multi-input MLSE with whitening processing can mitigate the influence of the interference and provide path diversity gain. In conventional considerations, however, the required complexity rapidly rises with the number of array elements. In this paper, we propose multi-input MLSE that whitens error signals in the signal space by using a multibeam adaptive array. This scheme can reduce the computational load of multi-input MLSE than the conventional type when using a large-element array. The results of an analysis show that the proposed type is equivalent to conventional one in the sense of the metric and provides less computational complexity.

A sub-Terahertz band is envisioned to play a great role in 6G to achieve extreme high data-rate communication. In addition to very wide band transmission, we need spatial multiplexing using a hybrid MIMO system. A recently presented paper, however, reveals that the number of observed multipath components in a sub-Terahertz band is very few in indoor environments. A channel with few multipath components is called sparse. The number of layers (streams), i.e. multiplexing gain in a MIMO system does not exceed the number of multipaths. The sparsity may restrict the spatial multiplexing gain of sub-Terahertz systems, and the poor multiplexing gain may limit the data rate of communication systems. This paper describes fundamental considerations on sub-Terahertz MIMO spatial multiplexing in indoor environments. We examined how we should steer analog beams to multipath components to achieve higher channel capacity. Furthermore, for different beam allocation schemes, we investigated eigenvalue distributions of a channel Gram matrix, power allocation to each layer, and correlations between analog beams. Through simulation results, we have revealed that the analog beams should be steered to all the multipath components to lower correlations and to achieve higher channel capacity.

In future mobile radio, high-speed transmission and efficient spectrum utilization will be important. However, multipath propagation with large delay difference and cochannel interference are obstacles to the advanced mobile communication system. An adaptive antenna can suppress multipath signals and cochannel interference signals. This paper reviews basic performance of multipath fading reduction and cochannel interference suppression using the adaptive antenna. After a brief explanation of adaptive antenna concepts, we show simulation and experimental results of the fading reduction. It is pointed out that the adaptive antenna cancels multipath signals with large delay difference strongly. This feature is very important for high-speed TDMA systems. Moreover, it is shown from simulation results that the adaptive antenna improves the spectrum efficiency by suppressing the cochannel interference signals.

A time-reversal (TR) approach with multiple signal classification (MUSIC) provides super-resolution for detection and localization using multistatic data collected from an array antenna system. The theory of TR-MUSIC assumes that the number of antenna elements is greater than that of scatterers (targets). Furthermore, it requires many sets of frequency-domain data (snapshots) in seriously noisy environments. Unfortunately, these conditions are not practical for real environments due to the restriction of a reasonable antenna structure as well as limited measurement time. We propose an approach that treats both noise reduction and relaxation of the transceiver restriction by using a time-domain gating technique accompanied with the Fourier transform before applying the TR-MUSIC imaging algorithm. Instead of utilizing the conventional multistatic data matrix (MDM), we employ a modified MDM obtained from the gating technique. The resulting imaging functions yield more reliable images with only a few snapshots regardless of the limitation of the antenna arrays.

Ultrawide-band impulse radio (UWB-IR) technology and multiple-input multiple-output (MIMO) systems have attracted interest regarding their use in next-generation high-speed radio communication. We have studied the use of MIMO ultrawide-band (MIMO-UWB) systems to enable higher-speed radio communication. We used frequency-domain equalization based on the minimum mean square error criterion (MMSE-FDE) to reduce intersymbol interference (ISI) and co-channel interference (CCI) in MIMO-UWB systems. Because UWB systems are expected to be used for short-range wireless communication, MIMO-UWB systems will usually operate in line-of-sight (LOS) environments and direct waves will be received at the receiver side. Direct waves have high power and cause high correlations between antennas in such environments. Thus, it is thought that direct waves will adversely affect the performance of spatial filtering and equalization techniques used to enhance signal detection. To examine the feasibility of MIMO-UWB systems, we conducted MIMO-UWB system propagation measurements in LOS environments. From the measurements, we found that the arrival time of direct waves from different transmitting antennas depends on the MIMO configuration. Because we can obtain high power from the direct waves, direct wave reception is critical for maximizing transmission performance. In this paper, we present our measurement results, and propose a way to improve performance using a method of transmit (Tx) and receive (Rx) timing control. We evaluate the bit error rate (BER) performance for this form of timing control using measured channel data.

A distributed antenna system, where the antennas of a base station are spatially distributed throughout the cell, can achieve better throughput at the cell edge than a centralized antenna system. On the other hand, the peak throughput degrades in general because each remote antenna unit has only a few antennas. To achieve both high peak and cell-edge throughputs, we need to increase the total number of antennas. However, this is not easy due to the pilot resource limitation when we use frequency division duplexing. In this paper, we propose using more antennas than pilot resources. The number mismatch between antennas and signals is solved by using a connection matrix. Here, we test two types of connection matrix: signal-distributing and signal-switching. Simulation results show that the sum throughput is improved by increasing the number of antenna elements per remote antenna unit under a constraint on the same number of pilot resources.

Currently, space division multiplexing (SDM), where individual data streams are transmitted from different antennas simultaneously, is expected to be a promising technology for achieving a high data rate within a limited frequency band in a multiple-input multiple-output channel. In this paper, transmitter and receiver architectures of SDM applications are described, and performance improvement with the increase of data streams is shown referring to results of computer simulations. In addition, channel coded systems are also evaluated.

We consider space division multiplexing in a MIMO-OFDM system for high data rate transmission. Channel estimation is very important for suppressing interference and demultiplexing signals. In a wireless LAN system such as IEEE 802.11a, only a few training symbols are inserted in each subcarrier. First, we propose a channel estimation method for a MIMO-OFDM system with two training symbols per subcarrier. The basic idea is to estimate the time-domain channel responses between the transmit and receive antennas. The array response vectors for each subcarrier are calculated by applying a fast Fourier transform to them. We then can obtain the adaptive weights to cancel the interference. We show that employing training symbols having a lower condition number of the matrix used for the channel estimation improves the estimation accuracy. Furthermore, we show the bit error rate for several signal detection schemes using the above estimated channel. It is shown that an ordered successive detection based on an MMSE criterion has excellent performance, that is, it can achieve higher-speed transmissions with a lower transmit power.

A uniform circular array (UCA) is a well-known array configuration which can accomplish estimation of 360 field of view with identical accuracy. However, a UCA cannot estimate coherent signals because we cannot apply the SSP owing to the structure of UCA. Although a variety of studies on UCA in coherent multipath environments have been done, it is impossible to estimate the DOA of coherent signals with different incident polar angles. Then, we have proposed Root-MUSIC algorithm with a cylindrical array. However, the estimation performance is degraded when incident signals arrive with close polar angles. To solve this problem, in the letter, we propose to use SAGE algorithm with a cylindrical array. Here, we adopt a CLA Root-MUSIC for the initial estimation and decompose two-dimensional search to double one-dimensional search to reduce the calculation load. The results show that the proposal achieves high resolution with low complexity.